REDUC® Isolation Tape
These tapes should be applied around the bottom of the wall. The boards are then placed up against the tape to give a water tight seal, however care must be taken to ensure that the boards are not jammed too tightly, or this could create a flanking path.
Each board thickness has its own tape, this is always 2mm bigger than the board depth, i.e. a 35mm deep board will require a 37mm wide x 5mm tape roll. All rolls are 10m in length.
The foam strip can come in a variety of depths to match the height of the acoustic floor being used. Skirting boards must also sit onto of this tape such that they do not touch the acoustic flooring itself.
Please see our Product Disclaimer.